Recessed ceiling downlights with various LED outputs, half beam angles and dimensions for installation in suspended ceilings. When the appropriate installation housing is used, the luminaires are also suitable for installation in concrete ceilings. The crystal glass projecting beyond the ceiling trim ring has a partial matt finish on the inside for optimum glare suppression and directs a part of the light sideways onto the ceiling. This creates additional visual comfort and a brilliant appearance through the intensity of the horizontal illuminance.
The external power supply units are included in the scope of delivery and are connected to the luminaire by means of a convenient plug connector. The electrical connection of the power supply unit can therefore be established before the final installation of the luminaire, if required by the customer.
Light for the house and the garden
Designed specifically for private use
Protection class IP 65
BEGA Thermal Management®
Cast aluminium, aluminium and stainless steel
Trim ring made of stainless steel
Partially frosted crystal glass
Reflector made of pure anodised aluminium
Silicone diffusing lens
External power supply units included on/off or DALI
20-year availability guarantee for LED module
The required installation depths can be found in the instructions for use for these luminaires.
Suitable installation housings for installing the luminaire and power supply unit in concrete ceilings are available as an accessory.
The luminaire luminous flux and the luminaire connected wattage quoted in the table may change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.