Wall luminaires with directed light

Symmetrical, asymmetrical or flat beam light distribution

Luminaires with a wide range of applications in façade and area lighting.

  • The symmetrical light distribution is used to illuminate façade and wall surfaces, whereby the mounting surface also acts as a reflection surface.
  • The asymmetrical light distribution illuminates the ground surfaces in front of walls and façades. Here, the main focus is on the spatial illumination of the ground surfaces.
  • The flat beam light distribution is used to illuminate ground surfaces in front of walls and façades. Here, the main focus is on the flat beam illumination of the surfaces near the building.

Economical luminaires with high luminous efficiency, low connected wattage and a long LED service life.

The luminaires can be installed in any burning position. This makes it possible to illuminate surfaces adjacent to the installation surface, such as ceilings, vaults, canopies and cantilever plates.

Technical data

Protection class IP 65
BEGA Thermal Management®

Cast aluminium, aluminium and stainless steel
BEGA Unidure® coating technology
Safety glass
Reflector made of pure anodised aluminium

DALI-controllable power supply units

The luminaires can be installed in any burning position.

20-year availability guarantee for LED module

The luminaire luminous flux and the luminaire connected wattage quoted in the table may change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

Protection class IP 65
BEGA Thermal Management®

Cast aluminium, aluminium and stainless steel
BEGA Unidure® coating technology
Safety glass
Reflector made of pure anodised aluminium

DALI-controllable power supply units

The luminaires can be installed in any burning position.

20-year availability guarantee for LED module

The luminaire luminous flux and the luminaire connected wattage quoted in the table may change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

View planning examples

Loading zone
Good light in a loading and manoeuvring zone guarantees safety and smooth working processes. Where there are several adjacent loading openings in a building, glare-free luminaires are therefore placed above and between the gates. Their asymmetrical very wide beam light distribution creates a degree of illuminance of about 50 lx. In addition, location luminaires are installed in the wall about half a metre above the ground in order to facilitate reversing. The entire company grounds are illuminated from a height of 8 m with pole-top luminaires, guaranteeing a basic illumination level of 20 lx.

Image gallery