Wall luminaires · Surface washers

Symmetrical or asymmetrical light distribution


Compact and efficient wall washers, available with either symmetrical or asymmetrical light distribution.

• The luminaires with symmetrical light distribution are used to illuminate wall surfaces. Here, the mounting surface also acts as a reflection surface.

• Depending on the beam direction, the luminaires with asymmetrical light distribution primarily illuminate the surfaces bordering the installation surface, such as ceilings, vaults, canopies, cantilever plates or ground surfaces.

Flush safety glass which reduces the accumulation of dirt and water are the norm for these luminaires. These are durable construction details that prove convincing thanks to maximum standards of lighting and structural quality.

Protection class IP 65
BEGA Thermal Management ®

Cast aluminium, aluminium and stainless steel
BEGA Unidure ® coating technology
Safety glass
Reflector made of pure anodised aluminium

DALI-controllable power supply units

The luminaires can be installed in any burning position.

20-year availability guarantee for LED modules

The luminaire luminous flux and the luminaire connected wattage quoted in the table may change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

Planning examples

On the basis of our empirical values and the suggestions of architects and planners, we have compiled room situations for which lighting design is frequently required. In the following, we shall present possible illumination solutions for these architectural situations. It goes without saying that all technical lighting standards are complied with. In some cases, the degree of illuminance proposed by us may even exceed the standard. For us, the aesthetics of light and a high level of visual comfort are important criteria for such decisions. At the same time, the form and the size of the luminaires must fit into the architectural surroundings. For example, we often recommend larger models if a structure has large dimensions – even if smaller luminaires with lower output would be enough. In such cases, the degree of illuminance can be reduced to a suitable level by means of a light control system.


Spa

In a spa zone, the illumination makes a significant contribution towards the well-being of the guests. Alternating zones with dimmed light and zones accentuated with illumination are ideal for the relaxation of the guests. At the same time, the lighting system must be able to illuminate the rooms clearly for cleaning purposes. On account of the climatic conditions in such facilities, only luminaires...

learn more


Finish
LED colour temperature
Symmetrical light distribution 
LED Power supply unit A B C AC/DC
 
Asymmetrical light distribution 
LED Power supply unit A B C AC/DC
no longer included in the current catalogue new in the range