Drive-over in-ground luminaires · 24 V DC

For installation situations with shallow installation depths

Linear in-ground luminaires in various lengths for installation in paved ground surfaces indoors and out. The different lengths and the compact dimensions allow a multitude of design options with linear light from ground level. Before the luminaires are installed, a foundation including drainage must be provided by the customer to absorb the pressure loads of the luminaires.

The luminaires can be driven over by vehicles with pneumatic tyres.

Pressure load 1000 kg
Length 100 · 200 · 400 · 1000 mm
Protection class IP 67
Safety class III

Cover frames and luminaire housings made of stainless steel
Installation housing made of aluminium
Safety glass
Reflector made of pure anodised aluminium
Connecting cable

A separate 24 V DC power supply unit is required to operate the luminaires.

An operating device and a colour light control are also required to operate the RGB luminaires.

20-year availability guarantee for LED modules

The luminaire luminous flux and the luminaire connected wattage quoted in the table may change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

Planning examples

On the basis of our empirical values and the suggestions of architects and planners, we have compiled room situations for which lighting design is frequently required. In the following, we shall present possible illumination solutions for these architectural situations. It goes without saying that all technical lighting standards are complied with. In some cases, the degree of illuminance proposed by us may even exceed the standard. For us, the aesthetics of light and a high level of visual comfort are important criteria for such decisions. At the same time, the form and the size of the luminaires must fit into the architectural surroundings. For example, we often recommend larger models if a structure has large dimensions – even if smaller luminaires with lower output would be enough. In such cases, the degree of illuminance can be reduced to a suitable level by means of a light control system.

Modern façade

The left-hand part of the building complex is faced with a concrete façade. This is illuminated from the ground with long slim in-ground luminaires which are installed as a band of light a short distance from and parallel to the façade. The entrance is marked by the glass front of the building. Here, the light from the interior is used to place the focus on the building. In the edging around the...

learn more

Religious room

In religious rooms, a control option for the illumination is of great importance. This is why we have decided in favour of dimmable pendant luminaires. Their light is directed downwards directly onto the surface to be illuminated. At the same time, an internal glass diffusor together with the outer glass creates vertical light. With these luminaires, a degree of illuminance of 150 lx is...

learn more

LED colour temperature
Location luminaires 
LED Power supply unit A B C
In-ground luminaires · Symmetrical light distribution 
LED Power supply unit A B C
In-ground luminaires · Asymmetrical light distribution 
LED Power supply unit A B C
RGB W location luminaires 
LED Power supply unit A B C
no longer included in the current catalogue new in the range

Drive-over in-ground luminaires · 24 V DC in use

Carmen Würth Forum, Künzelsau Learn more
Holmestrand, Brygge Learn more