Zhaga Book 18 Ed 3.0 combines the coordinated specifications of the Zhaga Consortium and the D4i specifications of the DALI Alliance – up to speed with the latest technological advances and ready for future developments in rapidly evolving digital network and sensor technology. The plug-and-play connectivity system makes it easy to add or update communication modules and sensors.
Easy control of street and footpath illumination
Luminaires with a Zhaga interface provide reliable illumination for areas such as streets or parks. Installing luminaires with a Zhaga Book 18 interface is an investment in the future: wireless control and monitoring is enabled by the use of communication modules. Retrofitting at a later date or subsequent replacement is easily possible.
Using luminaires with a Zhaga interface is the convenient and quick solution for the control of street and footpath illumination – for example online via the cloud:
For existing systems without DALI wires that require digital control
For existing systems and their luminaire connection boxes that are not suitable for retrofitting five-wire cables due to the maximum cable cross-section or for which extensive earthworks should be avoided
For new systems for which no local cable-bound network infrastructure can be established, or where this is not desired
For new systems for which no local Internet infrastructure for cloud-based control can be established, or where this is not desired
How does the standardised interface work?
Zhaga Book 18 Ed 3.0 specifies the mechanical, electrical and communications technology standard for the interface between a communication module or sensor and the luminaire electronics
The Zhaga D4i certification of our LED luminaires guarantees an electrified standardised jack and the use of power supply units that fulfil the D4i requirements
The communication between the communication module or sensor and the power supply unit of the luminaire is standardised and therefore works across different manufacturers
The luminaires can also be operated without a communications and/or sensor module – retrofitting is extremely easy
Kommunikasjonsmoduler
Kommunikasjonen mellom individuelle armaturer og/eller et overordnet system skjer trådløst.
Vi har utviklet Zhaga Air Connector spesielt for kompatible mastarmaturer. Dette bringer IoT-funksjoner til hver armatur, uten behov for styreledning eller Internett-tilgang på stedet. Alle armaturer med Zhaga Book 18 Ed 3.0-sokkel, kan integreres i BEGA Connect Cloud med Zhaga Air Connector – bokstavelig talt i en håndomdreining! En kombinasjon med Zhaga-sensormoduler er også mulig.
Hver Zhaga Air Connector representerer et eget endepunkt til BEGA Connect Cloud. På plattformen kan alle armaturene styres i et felles system og følge de samme automatiseringsreglene.
Light and motion sensors
The connectivity system makes it possible to add, exchange or upgrade sensor modules at any time independently of the manufacturer. Sensor configuration is carried out via the control system connected through the communications module.
