Inte längre i sortimentet

Armaturer för stora ytor

Tak- och väggarmaturer
Denna produkt ingår inte längre i det aktuella leveransprogrammet

Observera att denna produkt inte längre är tillgänglig. Du kan fortfarande få tillgång till alla tekniska data och nedladdningar genom att klicka på respektive tabellrad. Naturligtvis står vi till ditt förfogande för serviceförfrågningar - kontakta oss gärna.

Armaturer för stora ytor från BEGA är armaturer för extremt stora ytor och jämnt ljus. Med stora mått och imponerande ljusstyrkor erbjuder dessa armaturer nya och kreativa utformningsmöjligheter på många områden inom arkitekturen.

De ger en imponerande ljusverkan både som enstaka armaturer och i grupper med armaturer i olika storlekar. De är lysande designelement som utöver sin belysningsfunktion även kan sätta sin prägel på både väggar och rum.

För perfekt anpassning av ljuset till den aktuella belysningssituationen är alla armaturer med DALI-styrning. LED-modulernas och alla tekniska komponenters långa livslängd och låga energiförbrukning sänker även underhålls- och driftkostnaderna.

Tekniska data

Kapslingsklass IP 65 BEGA Thermal Management ®

Aluminiumgjutgods, aluminium och rostfritt stål Lackeringsteknik BEGA Unidure® Säkerhetsglas

Nätdelar med DALI-styrning

20 års inköpsgaranti för reservdelar LED-moduler

Visa planeringsexempel

Commercial building entrance
The covered area in front of a commercial building is illuminated from a great height with efficient downlights. The focus is placed on the square pillars supporting the roof using very narrow beam in-ground floodlights on the front side. On the sides and at the rear, they benefit from the light of the downlights. A roof panel projecting over the entrance is fitted with recessed ceiling luminaires to emphasise the way into the building. The illumination level here is about 100 lx. The general lighting of the interior space and of the commercial rooms is effected with large-format, very flat ceiling luminaires. 

Spa
In a spa zone, the illumination makes a significant contribution towards the well-being of the guests. Alternating zones with dimmed light and zones accentuated with illumination are ideal for the relaxation of the guests. At the same time, the lighting system must be able to illuminate the rooms clearly for cleaning purposes. On account of the climatic conditions in such facilities, only luminaires with high protection classes are installed. In the whirlpool cubes, wall luminaires cast wide-beam light onto the ceiling, and this light is reflected softly back into the room. The pools are fitted with underwater luminaires whose light colour can be adjusted variably via RGBW. Between the cubes, in-ground floodlights accentuate the shower area. This light effect is repeated on the front pillars using in-ground floodlights. In the room, soft light falls from the ceiling via flat square luminaires. Recessed wall luminaires line the paths at a height of 40 cm, thus creating safety and structure. Recessed ceiling downlights are installed in the outdoor terrace covering roof.

Waiting zone
As a rule, there is a quiet atmosphere in waiting zones. Some people are reading or sleeping, others are busy with their laptop or smartphone. The illumination of the entire area is effected using downlights. Due to their thick, partially frosted crystal glass, most of the light is emitted directly downwards onto the floor. An average of 150 lx is reached at floor level. The remaining light is refracted by the edge of the glass and is diffused through the matt finish. In this way, the light is also distributed vertically into the room. In addition, flat, square wall luminaires emit soft light.

Bildgalleri